Open Your Modem Management page in IE: http://192.168.1.1

Username: Admin
Password: Admin

and Click “Log In”

Click “Setup”.

Now Click “New Connection” from left Menu

Now Folow these Steps:

- In Name Tpe: Apnimarzi-PTCL-DSL

- Type: PPPoE

- Sharing: Disable

- Options: Click NAT & Firewall

- Username: YOUR USERNAME (if you dont remember ask 1218)

- Password: Default password from PTCL is “ptcl”, if you changed it typr your password here.

- VPI: 8 For FiberOptic Numbers

- VPI: 0 For Copper Numbers

- VCI: 81 For FiberOptic Numbers

- VCI: 103 For Copper Numbers

Now Click Apply and then click Connect.

to check your connection status click home

To Save Setting:

Click “Tools” from Top Bar

then click “Save All” & Restart.

Thats All Good Luck.

Blog Widget by LinkWithin

4 Responses to “Configuring PTCL DSL on PARADYNE Modems”

  1. abdulnaeem says:
    June 5, 2009 at 12:33 am

    I have tried the same for PTCL DSL
    Paradyne Modem Configured but no browsing no pinging to the PTCL own servers

    so this configuration is not working for PTCL DSL on Paradyne Modem

    Any new solution?????

  2. admin says:
    June 5, 2009 at 7:04 am

    VPI: 8 For FiberOptic Numbers
    VPI: 0 For Copper Numbers
    VCI: 81 For FiberOptic Numbers
    VCI: 103 For Copper Numbers

    VPI & VCI should be same, and please check your DSL light status, should be stable.

  3. ali hassan says:
    October 9, 2009 at 4:13 am

    well, any expert there who can friendly recommend me the best DSL modem for ptcl line.coz m facing low snr margin problem on copper back bone :( , any suggestion will b appreciate . Thnx in advance …

  4. badshah says:
    August 27, 2010 at 12:14 am

    hey buddy what todo with ip address

Leave a Reply